SMT Service Capabilities

Check out the production video below!

Conveyor Production

Production Runs - low & mid-volume production runs approximately 500,000 pieces or less.
High-Speed Pick & Place Machines place up to 39,000 Surface Mount Devices per hour, per line.
SMD size capabilities – as small as .0201
Board Sizes - 1.97” x 2.75” (50mm x 70mm) and up to 20” x 20” (510mm x 508mm) at a thickness range of .008” x .24” (.2mm - 6mm).  

LED Boards up to 48" long

Non-conveyor Production

Production Runs - low & mid-volume production runs approximately 500,000 pieces or less.
High-speed placement of complex components with tight tolerances accurately placing up to 3,600 Surface Mount Devices per hour per machine.
SMD Size Capabilities - .0402 to 3” square,
Feeder Station per machine – more than 100 for high-volume placement of surface mount devices per board in a single pass.  These machines come equipped with vacuum board supports for increased placement accuracy on boards under the standard .062 thickness.

 

CONTACT US and let us apply our costs saving assembly techniques to your next project.

Or, simply submit your RFQ to RFQ@gmsww.com 

Visit our REQUEST FOR QUOTE page for information that will allow us to respond quickly to your request. 

Click here to view our Overseas SMT Production capabilities.